Description
[Material] -The electric borehole water pump is made of ABS and alloy. It has high hardness and good sealing. Please wipe it with lubricating oil before each use and rinse it with clean water after use. When pumping abrasives and liquids containing solids, it is necessary to add a filter to the inlet pipe to achieve a longer service life. [High Performance] -The operating temperature range of the fuel pump is 5 to 49 degrees Celsius. The oil pump’s flow rate at 1500 rpm is 15 L per minute, and at 3000 rpm, it is 30 L per minute. Note: The recommended speed is between 1500 and 3500 rpm. Before use, ensure the hose at the oil pump connector inlet is sealed and that the hose length does not exceed 2.75 meters (9 feet). [How to Use] – Our product is powered by an electric drill. After starting, check if fluid is drawn into the pump through the water inlet hose within 15 to 20 seconds. If not, check if the oil inlet hose is properly installed on the oil inlet pump. Note: Do not allow the